Technology Associates Inc.(remembered)
The EternaLight assets of Technology Associates, Inc.
have been transfered to EternaLights, LLC. All orders and services issues will be handled by them.

History:
In 1992, Thomas Hoops and Derone Bryson founded Technology Associates. In 1994, their partnership incorporated under the name of Technology Associates, Inc. Between 1993 and 2000, Technology Associates successfully operated a small chain of computer stores in the Reno/Sparks area which sold and serviced computers.
Technology Associates was also one of the founding investors in Great Basin Internet Services (GBIS), Northern Nevada's Largest Independent internet service provider. In 1998, TA divested itself of GBIS. In 2000, TA divested itself of it's retail stores to pursue manufacturing of the EternaLight flashlight and other related and unrelated products developed by Thomas Hoops and Derone Bryson. In 2007, the organization formerly known as Technology Associates, Inc., founded by Thomas Hoops and Derone Bryson in 1992 ceased to exist.

This site is still a functioning sales platform for the EternaLight products manufactured and sold by EternaLights, LLC. However, the remainder of the site remains as it was in it's finality before the closing of Technology Associates, Inc.

Today Mr. Bryson is privately employed as a Software Engineer. Mr. Hoops is privately employed in a manufacturing company as it's CTO. After working together since 1990, through their various projects and partnerships, Mr. Hoops and Mr. Bryson are still best friends and continue to explore new opportunities together.

EMAIL FOUNDER

eternaLight Elite Series Statement of Water Tightness

(last updated 1/29/02)

The statements and test results below are only for informational purposes and not to imply any sort of warranty or standard of performance.

The eternaLight EliteXRay model 4X is only said to be "water resistant". Meaning that if the unit is accidentally immersed in water for a short period of time, the unit will likely continue to function without fault. This being said, below are the results of actual tests which far exceed the statement above, keep in mind that the eternaLight is not meant to be a diving light.

On January 10th, 2002, two randomly selected production model Elite XRays were taken to Quest Sports (Ameriquest, Inc.) for depth pressure testing. Ameriquest Inc. is a leading manufacturer of under-water enclosures for video cameras. Dale Peronteau, president of Ameriquest, conducted the following tests himself in a wet pressure chamber which simulates the pressures of water at depth.

The first unit was taken to a depth of approximately 120 feet. At that depth, there was enough pressure to activate the switches on the eternaLight, causing it to come on or behave strangely since all buttons are being depressed simultaneously. However, there is no apparent lasting ill side effect from this and after disassembly, the unit did not show any evidence of leaking.
*Note: Depressing all switches at once will not harm eternaLight or shorten its life.
The same unit was then taken to a depth of about 230 feet for a period of 5 minutes. After removal from the tank and upon inspection, a small droplet of water could be seen in the bottom corner of the unit. No other damage or penetration had occurred. 230 feet was the maximum pressure the tank was safely rated for. The depth at which implosion or other damage may occur is unknown.
The second unit had been severely abused (four 50 foot drops, rolled over by a truck on pavement, three 12 foot drops onto concrete). This unit was taken to a depth of 60 feet for 1 minute. When removed from the tank, it showed no signs of leakage or malfunction.

As further testing occurs, this page may be updated.

The eternaLight Model 4X EliteXRay is only as water resistant as the perfection of its last assembly. There is no "per unit" test in this area, such would be extraordinarly expensive and would be meaningless once the unit were dismantled for any reason like a battery change. Because of this, if you intend to use your unit in an environment which will subject it frequently to immersion, we suggest that you dismantle and inspect your unit often. Be sure there is no debris or defects on the gasket or the perimeter and seal line. Be sure the unit is assembled securely. Be sure you have applied an even torque to each screw. Check your light frequently for any moisture build up inside. If such is found let the unit air-dry for 12 hours or more before assembling. Such build up can cause corrosion and damage the unit.

Be aware that use of Alkaline batteries will not damage the unit but will make it too heavy to float.

Use the contacts in the left column to contact the webmaster.

Unless specifically noted, all pictures and graphics may be visually enhanced for marketing purposes and should not be used as a basis for determination of performance.
Copyright © 1998-2004 Technology Associates, Inc. All Rights Reserved. All trademarks and copyrights on this page are owned by their respective owners.

Current server uptime: 06:16:33 up 40 days, 15:08, 0 users, load average: 0.00, 0.03, 0.08